FIT Protection LOXX® Exclusive North American Partner

Never lose another cover. Or another weekend.

This is the trust badge only FIT has. LOXX® has spent roughly ~100 years on one craft: engineering how to fasten one thing to another so the connection does not come apart under load, vibration, and weather. Their positive-lock fasteners are used in environments that do not tolerate failure — military, aerospace, and marine applications where a loose connection is not “inconvenient,” it is unacceptable.

That pedigree is exactly why FIT partnered with LOXX® as the exclusive North American partner for glass protection systems. We are not bolting on generic hardware. We are putting century-tested fastening discipline into model-specific UTV and RV covers so they stay planted on highway miles, crosswinds, and real outdoor abuse — while protecting glass that can run $500+ on a UTV and $3,000+ on an RV, plus the trip you lose if it cracks.

Nobody else offers this stack. Magnets align the cover. LOXX® locks it down. Built in Arizona. Free shipping lower 48. UTV: Magnetic Series from $364 or All-LOXX® at $409 — pick one system. RV: hybrid Mag + LOXX® included at the load-bearing points.

~100 yearsFastening expertise
MilitaryMission-grade hold
AerospaceFailure not an option
MarineWeather & vibration
Exclusive NAFIT × LOXX® only
~100 years fastening heritage Military · aerospace · marine Exclusive NA LOXX® partner 300+ lb hold per fastener Hand-built in Arizona
FIT Protection windshield cover with LOXX positive-lock retention fasteners visible around the perimeter
LOXX marine-grade stainless steel positive-lock fastener — cover-side fastener and frame-side stud
Two parts. One positive lock.

This is the LOXX® fastener.

Precision-machined from marine-grade stainless steel. No plastic clips, no generic snaps — just a two-part positive-lock fastening system built for mechanical retention.

A
Cover-side fastenerSewn into the cover. Seats over the stud and locks into place.
B
Frame-side studLow-profile base mounts to the windshield frame and stays nearly invisible when the cover is removed.
Why the partnership matters

Century-tested fastening. On your glass.

Most cover brands stop at fabric and magnets. We went further: partner with the company that has spent about a hundred years solving mechanical hold for military, aerospace, and marine use — then build model-specific FIT covers around that hardware. Positive-lock retention for highway towing, crosswinds, vibration, and real travel. Exclusive North American LOXX® partner for this application. Nobody else has this stack.

~100 yr
LOXX® fastening heritage
Mil · Aero · Marine
Where LOXX® is trusted
300+ lb
Holding force per LOXX® fastener
Military · aerospace · marine pedigree · exclusive North American cover partner
Exclusive North American partner

A trust badge nobody else has.

Most covers stop at fabric and straps. We went to the company that has spent a century solving mechanical hold for the hardest industries on earth — then built glass protection systems around that hardware.

  • ~100 years of fasteningLOXX® has engineered how one object locks to another so connections stay connected under vibration, load, and weather — not fashion hardware, real retention science.
  • Military, aerospace & marineThe same positive-lock discipline used where failure means downtime, safety risk, or a ruined mission. We put that pedigree on UTV and RV glass.
  • Why FIT partnered with LOXX®We needed covers that stay planted in highway wind, crosswinds, and real outdoor abuse — while protecting glass that costs hundreds to thousands to replace. LOXX® was the only retention partner that met that bar. FIT is the exclusive North American partner for this application.
  • Harsh outdoor conditions, model-specific fitMarine-grade shells, pattern-cut glass, and mechanical lock-down where it matters — built in Arizona for the trip you actually take, not a parking-lot demo.
UTV pricing · pick one system

Mag or All-LOXX®. Clear totals.

RV covers ship hybrid (mag + LOXX® at load points) included. On UTV you choose retention — not a mystery surcharge.

$364
Magnetic Series · from
$409
All-LOXX® Series

Recommended: All-LOXX® if you tow, run highway miles, or want maximum mechanical hold. Mag if you want fast everyday on/off for storage and camp.

Proof you can see

300+ lb. One fastener.

Watch a single LOXX® fastener lift over 300 lb of water — proof of the mechanical holding force behind the FIT Protection × LOXX® Retention System.

Load test: one LOXX fastener suspends a stack of water crates 300+ lb held · one fastener Watch the Test

UTV covers use 6 fasteners. RV covers use up to 10.

Shop the lineup

Most chosen LOXX-ready fits.

Start with FIT's most popular UTV and RV applications, then upgrade to LOXX® retention where available.

Install once. Lock in every trip.

Three seconds. Zero tools. It's locked.

Real footage — no edits, no tricks. Align the cover, press each fastener down over its stud, and it locks by hand. When the trip's over, it releases just as fast.

Press to lock
Lock it on. Press the fastener over the stud — seated and holding in about three seconds.
Release by hand
Take it off. No tools, no struggle — release by hand whenever you want the cover down.
Why retention matters

The real cost is downtime.

A cracked windshield can mean repairs, dealer delays, canceled trips, and weeks without your rig. LOXX® retention helps keep the cover locked down when the road gets rough.

Magnetic hold → mechanical lock-down

Choose your retention level.

FIT's magnets are already strong. LOXX takes it further — positive-lock mechanical retention you can measure.

Standard on every cover

Magnetic system

Included

850 lb magnetic pull force for fast alignment and everyday protection.

UTV All-LOXX® · $409

LOXX UTV upgrade

1,800+ lb

6 positive-lock fasteners for 1,800+ lb of total mechanical holding force.

Standard on RV covers

RV hybrid retention

300+ lb per fastener

Magnetic alignment plus LOXX® positive-lock fasteners at the load-bearing points — 300+ lb of mechanical hold per fastener on top of the magnetic system.

Inside the cover

One protection system.

Marine-grade vinyl, impact-absorbing foam, reinforced binding, and LOXX® retention hardware work together as one protection system.

Every FIT Protection cover layers marine-grade vinyl, impact-absorbing foam, reinforced edge binding, and LOXX positive-lock fasteners.

6 LOXX® fasteners

Positive-lock mechanical retention on UTV covers.

Marine-grade vinyl

UV stable, weather resistant, made for exterior use.

Impact-absorbing foam

Helps cushion against road debris and rock impact.

Reinforced edge binding

Durable finish built to withstand real-world use.

Real customers

What owners are saying.

★★★★★ 4.2 average · 544+ verified reviews
★★★★★

Stays on like it's bolted on

Awesome product. Stays on the windshield like it's bolted on. Highway speeds, gravel roads, no movement at all.

— Bobby S., Polaris Ranger
★★★★★

Saved $1,500+ on glass

Cover fits perfectly and is very well made. For the cost of a new windshield, this is a no-brainer. Already paid for itself.

— George, RV owner
★★★★★

Quality you can feel

Opened the box and was immediately surprised by the quality. Watched the install video, took 15 minutes. My RV stays noticeably cooler too.

— Benny W., Keystone Cougar
Common questions

Before you buy.

What's the difference between magnets and LOXX?
Magnets align and hold the cover with pull force — fast and clean for everyday use. LOXX® positive-lock fasteners add mechanical retention: each one physically locks the cover to a stud, so hold is measured in holding force, not friction. Magnets align it; LOXX locks it down.
Does LOXX replace the magnets?
No. LOXX works with the magnetic system, not instead of it. Magnets handle fast alignment and everyday hold; LOXX adds positive-lock mechanical retention for travel. RV covers use a hybrid of both; UTV covers can upgrade to all-LOXX.
How much holding force does LOXX have?
Each LOXX® fastener delivers 300+ lb of mechanical holding force (LOXX manufacturer spec). That force adds up with every fastener on the cover.
How many LOXX fasteners are on a UTV cover?
UTV covers use 6 LOXX® fasteners — 1,800+ lb of total mechanical holding force.
How many LOXX fasteners are on an RV cover?
RV covers use LOXX® positive-lock fasteners at the load-bearing points (typically 4–6, depending on the rig), each adding 300+ lb of mechanical hold on top of magnetic alignment.
Is the LOXX system removable? Can I still take the cover off quickly?
Yes. LOXX is designed for repeated install and release. The cover locks on for travel and releases by hand in seconds — no tools, no permanent attachment. Quick enough for daily on/off.
Does it require drilling?
No. Both the magnetic and LOXX systems install without drilling a single hole in your rig. Your factory warranty stays intact.
Will it damage my windshield or frame?
No. Interior magnet mounts use 3M VHB tape (or optional removable pads), and the low-profile LOXX studs mount without drilling into glass. Nothing permanent, nothing that harms the frame.
Is LOXX included or an upgrade?
RV covers include hybrid magnet + LOXX retention as standard. UTV covers ship magnetic standard, with an All-LOXX® at $409 at checkout.
Will this fit my year, make, and model?
We custom-cut covers for 90+ UTV and RV models. Use the picker on our shop pages to find your exact year/make/model — if we don't have your rig yet, email info@fitprotection.com and we'll add it.
Stop hoping it doesn't happen

Protect the glass before the road takes it.

Custom-cut for 90+ UTV and RV models — built to help protect against $500+ UTV glass jobs and $3,000+ RV front-glass work. UTV covers: magnetic standard, All-LOXX® $409. RV covers: hybrid magnetic + LOXX® retention.

100% no-drill · Free shipping (lower 48) · Perfect-fit rebuild free · Mag $364 · All-LOXX® $409 · Hand-built in Arizona